Diaphragm pumpsXDD1

  • Description
  • Specification
  • XDD1 Diaphragm Vacuum Pump
  • Applications


XDD1 diaphragm pumps are used for backing small compound turbomolecular pumps in clean, high vacuum applications, and also designed to be free standing bench top units. A typical ultimate pressure of better than 5 x 10-8 mbar can be achieved when using an XDD1 to back a 70 ls-1 turbomolecular pump.
The 24 V version is designed to provide a complete pumping package using the Edwards Turbo and Instrument Controller (TIC). The d.c. voltage motor runs on 24 V via a 15 pin DIN connector. By selecting the appropriate mode the pump speed can be controlled by the user to provide variable pumping speed. This version is suited to the customer who is building their own a system. The pump is a compact and efficient. Under normal conditions the XDD1 is virtually maintenance free, the lifetime of the diaphragms and valves is typically > 10,000 operating hours, depending on the application.


Dry pumping, lubricant free technology eliminating the need for costly oil changes and disposal.
Lightweight and compact with a small footprint allowing flexibility of use.
Ideal backing pump for small turbomolecular pumps.
Complies with EN61010, EN1012, CSA/UL standards.
Worldwide 115/230 V or 24 V options.
IEC 60320 C14 connector on a.c. pumps.

XDD1 Diaphragm Vacuum Pump

Pumping Speed
50Hz1,2 m3h-1
60Hz1,4 m3h-1
600 rpm0,6 m3h-1
1700 rpm (Factory setting)1,4 m3h-1
2400 rpm1,8 m3h-1
Ultimate vacuum (typical)< 2 mbar
Ambient temperature limit10 – 40 °C
Inlet connectionNW16
Exhaust connectionPompa wyposażona jest w zdejmowalny tłumik oraz przewód wydechowy połączony złączką BSP 1/8 cala
Max allowed inlet pressure1 bar (abs)
Power connectorIEC EN60320 C13
Motor power
a.c.80 W
d.c.64 W
a.c.6,5 kg
d.c.4,1 kg



• Residual gas analysis.
• Mass spectrometers.
• Cryostat and Dewar evacuation.
• Ion pump evacuation.
• Surface science.