Automatic hot mounting press PRESSLAM 1.1
Description
The PRESSLAM®1.1 is a multi-purpose, easy-to-use, automatic hot mounting press that will allow you to achieve high production levels.
All parameters are accessible via a 5.7” colour touch screen. The graphic interface guides you intuitively through the different settings, which you can then store and reuse at will. It is also possible to transfer predefined hot mounting parameters via the machine’s USB port. All phases are visible on the screen during the hot mounting cycle and can be modified at any time.
Each function can be adjusted separately and 4 pressurisation modes are available, along with a function reducing the amount of water used for cooling.
Once put in service the PRESSLAM®1.1 runs a pre-heating cycle that is cleared after 6 minutes without user intervention.
Access to mould is wide open for a sample positioning and filling facility. Quick and effortless, the locking/unlocking is realised by a cover and a ¼ turn locking lever.
Specification
| Plate capacity | Ø 25,4 – 50 mm |
| Heating system | 4 x 600 W around mould |
| Temperature range | 20 to 200°C |
| Heating cycle | 0 to 30 min |
| Cooling cycle | 0 to 30 min |
| Pressure | 0 to 1,600 daN |
| Double mounting | Yes – all diameters |
| Program back-up | 300 with USB connexion |
| Pressurisation modes | 4 different modes |
| Chamber closing | Half turned cover with a safety chamber |
| Mould changing | Quick, without connectors- electric or hydraulic |
| Pre-heating mode | Yes (cleared after 6 min without manipulation) |
| Water saving | yes (up to 25%) |
| Voltage | 230V – 50 Hz |
| Pneumatic feed | 6 to 10 bars |
| Dimensions (W x H x D) | 250 x 680 x 470 mm |
| Weight | 72 kg (depending on mould size) |
| Reference | 60 PL110 00 |
Consumables
Po więcej materiałów eksploatacyjnych zapraszamy do naszego sklepu internetowego Micro-Shop.