Easy-to-use, productive, automatic hot mounting press
The PRESSLAM® 1.1 is a multi-purpose, easy-to-use, automatic hot mounting press that will allow you to achieve high production levels. All parameters are accessible via a 5.7” colour touch screen. The graphic interface guides you intuitively through the different settings, which you can then store and reuse at will. It is also possible to import/export predefined hot mounting parameters via the machine’s USB port. All phases are visible on the screen during the hot mounting cycle and can be modified at any time.
Each function can be adjusted separately and 4 pressurisation modes are available along with a function reducing the amount of water used for cooling. As soon as the PRESSLAM 1.1 is switched on, it runs a preheating cycle that is cleared after 6 minutes without user intervention. The 20 to 200°C temperature range makes it possible to use all resins available on the market.
Access to the coating chamber is wide open for a sample positioning and filling facility. The locking unlocking of the coating chamber is quick and effortless by a canopy and a 1/4 turn locking lever.
Exclusive safety device
The raise of the sample, after the mounting cycle, is possible only when the safety canopy is located in its intermediary position. This device creates a safety chamber, where the sample will stay even when a sticking case could appear.
The PRESSLAM® 1.1 is equipped with a main heating unit, which houses the removable cylinder. The standard heating unit covers diameters from 25,4 to 40 mm and a specific element is available for a diameter of 50 mm.
The mould may be changed without tools and without electrical or hydraulic connections. Changing the full heating unit takes only few minutes.
The PRESSLAM® 1.1 is the ideal link in your mounted sample production line. It is a compact machine that is both easy to use and easy to maintain and will allow you to increase your productivity while maintaining unrivalled flexibility.
|Capacity||Ø 25,4 to Ø 50 mm|
|Heating system||4 x 600 W around mould|
|Temperature range||20 to 200°C|
|Heating cycle||0 to 30 min|
|Cooling cycle||0 to 30 min|
|Pressure||0 to 1,600 daN|
|Double mounting||Yes – all diameter|
|Program backup||300 with USB connection|
|Pressurization modes||4 different modes|
|Chamber closing||half turned canopy with a safety chamber|
|Mould changing||Quick, without connectors – Electric and hydraulic|
|Preheating mode||Yes (cleared after 6 min without manipulation)|
|Water saving||Yes (up to 25%)|
|Voltage||230 V – 50 Hz single-phase|
|Pneumatic feed||6 to 10 bars|
|Dimensions L x D x H||250 x 470 x 680 mm|
|Weight||72 kg depending on mould size|
|Reference||60 PL110 00|