Laboratory economic micro cutting machine
The CUTLAM®micro 1.1 allows you to include a versatile and robust machine in your laboratory within a reasonable budget. its speed range and cutting chamber capacity will enable you to use it in many applications with a variety of cutting wheels (diamond, Al2o3, etc.) up to 150 mm diameter.
The work piece is held by a vice-holding arm. The knob, located outside the cutting chamber, allows a micrometric movement of the Z-axis.
A whole sample holder range is available, for clamping pieces and materials of any kind.
The cutting feed is controlled with the sliding weight system, allowing you to fine tune the load applied to the piece. This system is particularly suitable for delicate and slow cuts.
|Wheel Ø||75 to 150 mm|
|Shaft Ø||12,7 mm|
|Standard flanges Ø||50 mm|
|Lateral arm displacement||Stroke 25 mm (accuracy 0,02 mm)|
|Preload weight||1 x 200 g.|
|Cooling||Recirculation system, 10 liters,
800 liters/min pump driven by the machine
|Motor power||0,18 kW|
|Rotational speed||Variable, from 50 to 1500 rpm|
|Protection||Transparent hood with opening security sensor|
|Voltage||230 Volts – 50 Hz single phase|
|Dim L x H x D||390 x 390 x 340 mm|
|Reference||60 CTM10 00|
|Recirculation coolant system, 10 liters||60 CTM10 10|
|Cylindrical sample holder with clamping screw: Ø 12 to 50 mm max||60 CTM03 10|
Equipped with an independent filter / decanting / recirculation tank, you can easily make slow cuts in optimum conditions of cooling.
Based on a robust aluminium frame clad in a painted metal body, the CUTLAM® micro 1.1 is stable and vibration free.
The hinged transparent hood avoids any spraying outside the machine and allows easy access for clamping vices on the arm. The hood is fitted with a safety device which stop immediatly the cutting wheel motor in case of opening.
|Set of flanges Ø 35 mm for Ø 75 to 100 mm cut-off wheels||
60 CTM10 10
|Set of flanges Ø 50 mm for Ø 125 to 150 mm cut-off wheels||
60 CTM01 20
|Cylindrical sample holder clamping by screw: Ø 12 to 50 mm max||60 CTM03 10|
|V sample holder clamping by screw: Ø 30 mm max||60 CTM03 20|
|Vice sample holder clamping by screw: Ø 12 mm max||60 CTM03 30|
|Vice sample holder double V clamping by screw: Ø 12 mm max||60 CTM03 40|
|Sample holder with multi screw clamping: for irregular parts||60 CTM03 50|